The 9-26 Type High-pressure Centrifugal Ventilator can be widely used for conveying materials, air, and gases that are non-corrosive, non-self-igniting, and free of viscous substances. The temperature of the conveyed medium generally does not exceed 80°C, and the dust and hard particles content does not exceed 150mg/m³. It is suitable for high-pressure ventilation in general forging and smelting, glass, ceramics, radio, electroplating, storage battery industries, as well as material conveying in processing industries such as grain, feed, mineral powder, and plastics.
The 9-26 Type High-pressure Centrifugal Ventilator can be widely used for conveying materials, air, and gases that are non-corrosive, non-self-igniting, and free of viscous substances. The temperature of the conveyed medium generally does not exceed 80°C, and the dust and hard particles content does not exceed 150mg/m³. It is suitable for high-pressure ventilation in general forging and smelting, glass, ceramics, radio, electroplating, storage battery industries, as well as material conveying in processing industries such as grain, feed, mineral powder, and plastics.
Type A: Direct drive with the motor, where the fan impeller and casing are directly fixed on the motor shaft and flange plate.
Type D: Equipped with a cantilever support device, driven by a coupling.
| 9-26A Core Technical Parameters | ||||||
| Model | Rotation speed (r/min) |
Voltage (V) |
Frequency (Hz) |
Power (kW) |
Air flow (m³/h) |
Total pressure
(pa) |
| 4A | 2900 | 380 | 50 | 5.5-2 | 2198-3215 | 3852-3407 |
| 4.5A | 2900 | 380 | 50 | 7.5-2 | 3130-3685 | 4910-4776 |
| 2900 | 380 | 50 | 11-2 | 3963-4792 | 4661-4256 | |
| 5A | 2900 | 380 | 50 | 15-2 | 4293-6349 | 6035-5381 |
| 2900 | 380 | 50 | 18.5-2 | 6349-6762 | 5381-5180 | |
| 5.6A | 2900 | 380 | 50 | 22-2 | 6302-7185 | 7610-7400 |
| 2900 | 380 | 50 | 30-2 | 7766-9500 | 7218-6527 | |
| 6.3A | 2900 | 380 | 50 | 45-2 | 8588-11883 | 9698-8915 |
| 2900 | 380 | 50 | 55-2 | 12699-13525 | 8636-8310 | |
| 9-26D Core Technical Parameters | ||||||
| Model | Rotation speed (r/min) |
Voltage (V) |
Frequency (Hz) |
Power (kW) |
Air flow (m³/h) |
Total pressure
(pa) |
| 7.1D | 2900 | 380 | 50 | 75-2 | 12292-14643 | 12427-12078 |
| 380 | 50 | 110-2 | 15862-19360 | 11776-10635 | ||
| 8D | 2900 | 380 | 50 | 132-2 | 17584-20947 | 15955-15504 |
| 380 | 50 | 200-2 | 22640-27696 | 15112-13634 | ||
| 380 | 50 | 18.5-4 | 8792-12166 | 3834-3529 | ||
| 380 | 50 | 30-4 | 13001-13848 | 3421-3294 | ||
| 9D | 1450 | 380 | 50 | 30-4 | 12518-14913 | 4869-4736 |
| 380 | 50 | 45-4 | 16118-19717 | 4626-4181 | ||
| 10D | 1450 | 380 | 50 | 55-4 | 17172-21465 | 6143-5920 |
| 380 | 50 | 75-4 | 23612-30052 | 5761-5065 | ||
| 11.2D | 1450 | 380 | 50 | 110-4 | 24126-36189 | 7747-7009 |
| 380 | 50 | 132-4 | 39205-42221 | 6691-6382 | ||
| 960 | 380 | 50 | 30-6 | 15973-21963 | 3346-3140 | |
| 380 | 50 | 37-6 | 23959-27953 | 3031-2763 | ||
| 12.5D | 1450 | 380 | 50 | 160-4 | 33540-41925 | 9713-9365 |
| 380 | 50 | 250-4 | 46117-58695 | 9103-7993 | ||
| 960 | 380 | 50 | 45-6 | 22206-27757 | 4179-4028 | |
| 380 | 50 | 75-6 | 30533-38860 | 3921-3450 | ||
| 14D | 1450 | 380 | 50 | 250-4 | 47121-53011 | 12285-12109 |
| 380 | 50 | 410-4 | 58902-82463 | 11830-10095 | ||
| 960 | 380 | 50 | 75-6 | 31197-35097 | 5262-5188 | |
| 380 | 50 | 110-6 | 38997-54596 | 5071-4341 | ||
| 16D | 1450 | 380 | 50 | 500-4 | 70339-79131 | 16250-16014 |
| 380 | 50 | 850-4 | 87923-123090 | 15640-13324 | ||
| 960 | 380 | 50 | 185-6 | 46569-69854 | 6911-6254 | |
| 380 | 50 | 220-6 | 75975-81496 | 5971-5696 |
The HTFC series multi wing low-noise cabinet centrifugal fan is a newly designed and developed product by our company to meet the needs of the increasingly developing commercial kitchen oil fume exhaust, industrial purification, and fresh air conditioning industries. Based on the digestion and absorption of advanced technologies at home and abroad, the principle of combining aerodynamics and aeroacoustics is applied. It has the characteristics of large air volume, high static pressure, low noise, and small vibration.
The YWF Series External Rotor Fan is a new product developed by our company through repeated research and trial production. Compared with conventional axial flow fans, this fan features higher efficiency, lower noise, minimal vibration, compact structure, and aesthetically pleasing appearance. The impeller is directly mounted on the outer circumference of the external rotor, resulting in shorter axial dimensions. Its successful development represents a major breakthrough in the field of axial flow fans. This series has obtained multiple national patents.
The CBF Explosion-Proof Axial Fan is specialized ventilation equipment for hazardous environments. The fan is composed of an explosion-proof motor, blades, casing, etc. To prevent sparks from friction, the blades are made of cast aluminum alloy.The fan features low noise, low energy consumption, and superior performance. In addition to ventilation and exhaust, it can be installed in spaced series along long exhaust ducts to increase duct pressure. Unlike general fans in structure and material, its applications are similar.
The blades of the medium pressure fan are designed to have the advantages of large air volume, high pressure, low vibration and low noise.
The HFJZ-B craftsman kitchen fan is a square-housed ultra-quiet multi-blade centrifugal fan specially designed for kitchen exhaust. It was engineered to meet the demand for low-noise kitchen fans in modern kitchens and the exhaust requirements of communal ductwork. Compared to conventional multi-blade fans, it offers advantages such as higher pressure and lower noise levels. Moreover, it features a high static pressure design to tackle long ductwork and high resistance typical of modern kitchen setups.
The medium pressure fan adopts stamped and aluminum alloy die-casting shell and fan blades, which are lightweight, novel in style, beautiful in appearance, and easy to install.The blades of the fan are designed to have the advantages of large air volume, high pressure, low vibration and low noise.
The fan features high wind pressure, high rotation speed, large air volume, mobile convenience, and strong suction. The casing is made of cold-rolled steel with plastic spraying, the impeller is cast aluminum alloy, and the motor is wound with pure copper wire. Manufactured with optimized aerodynamic design and advanced processing technology, it has a lighter structure.
The YWF Series External Rotor Fan is a new product developed by our company through repeated research and trial production. Compared with conventional axial flow fans, this fan features higher efficiency, lower noise, minimal vibration, compact structure, and aesthetically pleasing appearance. The impeller is directly mounted on the outer circumference of the external rotor, resulting in shorter axial dimensions. Its successful development represents a major breakthrough in the field of axial flow fans. This series has obtained multiple national patents.
The XBDZ(DFBZ) Series delivers high efficiency, low noise, and smooth operation for wall-mounted ventilation in industrial plants, commercial buildings, stadiums, and entertainment venues.
The vortex air pump has the characteristics of compact structure, small volume, light weight, low noise, and dual-use of blowing and suction. The shell is made of aluminum alloy material, further optimizing heat dissipation, and the motor is wound with pure copper wire . Widely used in supporting equipment, water treatment aeration, aquaculture, gas transmission, air dust removal, dry bottle, feeding, collection, etc.
The stove fan can be installed in the stove system to enhance air circulation or exhaust smoke. It is commonly found in household stoves, integrated stoves or commercial kitchen equipment.
The DF Series Low-Noise Centrifugal Blower features excellent process design, robust materials, stable and reliable performance, and significant noise reduction effects. It is characterized by low noise, high efficiency, long service life, and easy installation. Widely applicable in industries and sectors such as telecommunications, power, electrical engineering, electronics, geology, coal mining, shipbuilding, and papermaking, it is particularly suitable for cooling, temperature control, and ventilation in environments including plastic machinery, printing machinery, blueprint machines, dryers, blow molding machines, and underground facilities.
The T35-11 series axial flow fans are suitable for transporting non-corrosive gases free of significant dust, with the ambient temperature not exceeding 60°C.It is widely used for ventilation and cooling in ordinary factories, warehouses, offices, and residential buildings.
The fan features high wind pressure, high rotation speed, large air volume, mobile convenience, and strong suction. The casing is made of cold-rolled steel with plastic spraying, the impeller is cast aluminum alloy, and the motor is wound with pure copper wire. Manufactured with optimized aerodynamic design and advanced processing technology, it has a lighter structure.
The casing of the plastic air mold fan is injection molded from engineering plastics, featuring light weight, low cost, good insulation and an attractive appearance. The blades of the fan are designed to have the advantages of large air volume, high pressure, low vibration and low noise.
The FA series exhaust fan has the characteristics of sturdy structure, beautiful appearance, low noise, and low energy consumption, and is suitable for ventilation, air exchange, and cooling in general environments such as factories, warehouses, offices, canteens, and kitchens.
