Ideal for moisture-proof drying; localized heating; construction sites; outdoor heating; equipment insulation; railway stations and airports; yachts and ships; paint drying; mobile heating; quick warming; venues and clubs; clean heat delivery; rapid temperature rise, etc.
Working pressure ≤ 0.8 MPa.
Features:
1.The fan heater adopts a vortex-type circulating air outlet, with an air throw distance of up to 3 meters,suitable for large spaces both indoors and outdoors
2.Fully enclosed motor; high airflow; overheat protection; low-noise impeller; rapid heating; automatic thermostat
3.Thermal‐protection motor with dual overheat safeguards (overheat protection device + inductive temperature probe); insulated exterior; leakage protection
4.Electronic and photoelectric flame‐sensing controller
5.Freely adjustable thermostat design: temperature range 5–55 °C
6.Stainless-steel combustion chamber; heated by diesel or kerosene; complete combustion with no odor
7.Dual filtration: fuel‐fill filter and fuel-suction filter
8.Fuel‐tank level indicator
9.Shutdown protection: after burner stops, fan runs on a delay to cool down
10.Equipped with wheels and handle for easy mobility, maintenance, and service
11.Well-ventilated, heat-insulated housing design to prevent exterior overheating during prolonged use
Applications:
Ideal for moisture-proof drying; localized heating; construction sites; outdoor heating; equipment insulation; railway stations and airports; yachts and ships; paint drying; mobile heating; quick warming; venues and clubs; clean heat delivery; rapid temperature rise, etc.
Working pressure ≤ 0.8 MPa.
| Core Technical Parameters | ||||||||||
| Model | Voltage (V) |
Frequency (Hz) |
Power (kW) |
Product size
(mm) |
net weight
（kg） |
gross weight
（kg） |
Air flow (m³/h) |
Fuel tank size
(L) |
Oil consumption
(L/H) |
Fuel type |
| LG-Y20 | 220 | 50 | 20 | 800 * 560 * 400 | 18 | 21 | 550 | 20 | 1.2-1.5 | Diesel/kerosene |
| LG-Y30 | 220 | 50 | 30 | 840 * 640 * 470 | 20.3 | 23.8 | 720 | 38 | 2.0-2.4 | Diesel/kerosene |
| LG-Y50 | 220 | 50 | 50 | 990 * 740 * 515 | 27.4 | 30.5 | 1100 | 56 | 2.5 - 4.0 | Diesel/kerosene |
| LG-Y70 | 220 | 50 | 70 | 1230 * 580 * 735 | 40 | 43.5 | 1300 | 68 | 2.5 - 5.4 | Diesel/kerosene |
| LG-Y100 | 220 | 50 | 100 | 1230 * 580 * 735 | 40 | 43.5 | 1300 | 68 | 4.0-8.0 | Diesel/kerosene |
| LG-Y135 | 220 | 50 | 135 | 1410 * 700 * 960 | 63 | 85 | 3200 | 100 | 8.0-10.8 | Diesel/kerosene |
| LG-Y150 | 220 | 50 | 150 | 1650 * 690 * 1125 | 92 | 128 | 4600 | 100 | 8.0-117 | Diesel/kerosene |
The T35-11 series axial flow fans are suitable for transporting non-corrosive gases free of significant dust, with the ambient temperature not exceeding 60°C.It is widely used for ventilation and cooling in ordinary factories, warehouses, offices, and residential buildings.
The impeller of the TSK centrifugal duct fan adopts a backward-curved wind wheel and the fan is directly connected to the duct. This fan features low noise, large air volume and no overload. While operating with low noise, the fan not only withstands high pressure but is also suitable for operation in long pipelines or those with many bends. Moreover, it allows for use in humid or damp environments.
The XBDZ(DFBZ) Series delivers high efficiency, low noise, and smooth operation for wall-mounted ventilation in industrial plants, commercial buildings, stadiums, and entertainment venues.
The FA series exhaust fan has the characteristics of sturdy structure, beautiful appearance, low noise, and low energy consumption, and is suitable for ventilation, air exchange, and cooling in general environments such as factories, warehouses, offices, canteens, and kitchens.
The fan features Low noise , high air volume , high pressure , low vibration , compact structure , small volume, light weight , easy installation and use .Versatile mounting bracket supports multiple installation orientations.
The DF Series Low-Noise Centrifugal Blower features excellent process design, robust materials, stable and reliable performance, and significant noise reduction effects. It is characterized by low noise, high efficiency, long service life, and easy installation. Widely applicable in industries and sectors such as telecommunications, power, electrical engineering, electronics, geology, coal mining, shipbuilding, and papermaking, it is particularly suitable for cooling, temperature control, and ventilation in environments including plastic machinery, printing machinery, blueprint machines, dryers, blow molding machines, and underground facilities.
The YE3 Series Three-Phase Induction Motor is a fully enclosed self fan squirrel cage three-phase induction motor, which adopts the national unified design standard. It has the characteristics of high efficiency and energy saving, high starting torque, low noise, small vibration, high reliability, power level and installation size in accordance with the IEC standards, and easy use and maintenance. This series of motors is widely used in general places and precision instruments without special requirements, especially suitable for industries such as reducers, air compressors, water pumps, oil pumps, assembly lines, packaging, food machinery, etc.
The HTFC series multi wing low-noise cabinet centrifugal fan is a newly designed and developed product by our company to meet the needs of the increasingly developing commercial kitchen oil fume exhaust, industrial purification, and fresh air conditioning industries. Based on the digestion and absorption of advanced technologies at home and abroad, the principle of combining aerodynamics and aeroacoustics is applied. It has the characteristics of large air volume, high static pressure, low noise, and small vibration.
The stove fan can be installed in the stove system to enhance air circulation or exhaust smoke. It is commonly found in household stoves, integrated stoves or commercial kitchen equipment.
SF Series Axial Flow Fans feature a smooth streamlined surface, offering advantages such as stable operation, high efficiency, low noise, and low energy consumption. The SF series fans are classified into three types by usage requirements: duct type, fixed type, and post type, and divided into 12 models by impeller diameter.
The blades of the medium pressure fan are designed to have the advantages of large air volume, high pressure, low vibration and low noise.
Applications: Suitable for moisture-proof drying, localized heating, construction sites, outdoor heating, equipment insulation, railway stations and airports, yachts and ships, paint drying, mobile heating, convenient warming, venues and clubs, clean heat delivery, rapid temperature rise, etc. Working pressure ≤ 0.8 MPa.
The XCF is a new type developed from the CF-11 series. Engineered to incorporate the needs of modern urban kitchens, this comprehensive fan balances features like high resistance, high static pressure, ultra-low noise, and safety in its design.Compared to conventional multi-blade fans, it offers advantages such as higher pressure and lower noise levels. Moreover, it features a high static pressure design to tackle long ductwork and high resistance typical of modern kitchen setups.Featuring a redesigned impeller with an optimized aerodynamic blade structure. This delivers key advantages: low noise, minimal vibration, and extended service life.
The HX63 is a new type developed from the 11-62 series. Engineered to meet the demands of green industry and environmental noise reduction. Featuring a redesigned impeller with an optimized aerodynamic blade structure. This delivers key advantages: low noise, minimal vibration, and extended service life. Suitable for kitchen exhaust, fume extraction, or ventilation in public venues like canteens, hotels, and restaurants. Also ideal for use with production equipment such as grain machinery, chemical machinery, and plastic machinery. Highly versatile and adaptable for wide-ranging applications.
The 4-79 series centrifugal fans are applicable for indoor ventilation in general factories and large buildings, capable of both air intake and exhaust. The gases transported include air and other non-combustible, human-harmless gases that are non-corrosive to steel materials. The gases must not contain viscous substances, with the dust and hard particles content not exceeding 150mg/m³, and the gas temperature should not exceed 80°C.
The fan features high wind pressure, high rotation speed, large air volume, mobile convenience, and strong suction. The casing is made of cold-rolled steel with plastic spraying, the impeller is cast aluminum alloy, and the motor is wound with pure copper wire. Manufactured with optimized aerodynamic design and advanced processing technology, it has a lighter structure.
