The Y5-48 series boiler centrifugal induced draft fan is specially designed to support industrial boilers (1-20 t/h) fired with various coal types and equipped with smoke and dust removal devices. It can be selected for any applications with similar inlet conditions and compatible performance requirements. The maximum ambient temperature for the fan operation shall not exceed 250°C, and the medium handled is flue gas. A dust removal device must be installed ahead of the induced draft fan to ensure the dust concentration in the flue gas entering the fan is less than 400 mg/m³.
The Y5-48 series boiler centrifugal induced draft fan is specially designed to support industrial boilers (1-20 t/h) fired with various coal types and equipped with smoke and dust removal devices. It can be selected for any applications with similar inlet conditions and compatible performance requirements. The maximum ambient temperature for the fan operation shall not exceed 250°C, and the medium handled is flue gas. A dust removal device must be installed ahead of the induced draft fan to ensure the dust concentration in the flue gas entering the fan is less than 400 mg/m³.
| Core Technical Parameters | ||||
| Model | Rotation speed (r/min) |
Power (kW) |
Air flow (m³/h) |
Total pressure (Pa) |
|
4C |
3550 | 5 .5-2 | 2932-5564 | 2221-1501 |
| 3150 | 4-2 | 2602-4937 | 1746-1180 | |
| 2800 | 3-2 | 2313-4388 | 1377-932 | |
| 2500 | 2 .2-2 | 2065-3918 | 1097-742 | |
|
5C |
3150 | 1 1-2 | 5304-9851 | 2819-1913 |
| 2800 | 7 .5-2 | 4715-8757 | 2223-1509 | |
| 2500 | 5 .5-2 | 4210-7818 | 1769-1202 | |
| 2240 | 4-2 | 3772-7005 | 1416-964 | |
|
6 .3C |
2800 | 22-2 | 9432-17516 | 3545-2403 |
| 2500 | 15-2 | 8421-15639 | 2819-1913 | |
| 2240 | 1 1-2 | 7546-14013 | 2259-1533 | |
| 2000 | 7 .5-2 | 6737-12511 | 1798-1221 | |
|
8C |
2000 | 30-4 | 13794-25619 | 3323-2253 |
| 1800 | 22-4 | 12415-23057 | 2686-1823 | |
| 1600 | 15-4 | 11035-20495 | 2118-1438 | |
| 1400 | 1 1-4 | 9656-17933 | 1619-1100 | |
|
10C |
1800 | 75-4 | 22250-44634 | 4483-2958 |
| 1600 | 55-4 | 19778-39674 | 3531-2332 | |
| 1400 | 37-4 | 17305-34715 | 2696-1782 | |
| 1250 | 22-4 | 15451-30995 | 2145-1419 | |
|
12 .5C |
1400 | 1 10-4 | 33800-67803 | 4234-2794 |
| 1250 | 75-4 | 30179-60538 | 3365-2223 | |
| 1 120 | 55-4 | 27040-54242 | 2696-1782 | |
| 1000 | 37-4 | 24143-48431 | 2145-1419 | |
Ideal for moisture-proof drying; localized heating; construction sites; outdoor heating; equipment insulation; railway stations and airports; yachts and ships; paint drying; mobile heating; quick warming; venues and clubs; clean heat delivery; rapid temperature rise, etc. Working pressure ≤ 0.8 MPa.
The T35-11 series axial flow fans are suitable for transporting non-corrosive gases free of significant dust, with the ambient temperature not exceeding 60°C.It is widely used for ventilation and cooling in ordinary factories, warehouses, offices, and residential buildings.
The SFB high-air-volume axial flow fan has undergone comprehensive upgrades based on the SF model, equipped with aluminum alloy sickle-shaped blades. It adopts an aluminum alloy casing to enhance the motor’s sealing performance, featuring low noise, large air volume, high wind pressure, excellent heat dissipation, and stable operation.
The 4-72 Model Centrifugal Fan conveys air and other non-flammable, non-toxic gases that do not corrode steel. No viscous substances are permitted within the system. The dust and hard particulate content must not exceed 150 mg/m³, and the gas temperature must not exceed 80°C. This fan employs backward-curved blades with superior aerodynamic properties, delivering smooth operation, high airflow, minimal vibration, high efficiency, and extended service life. It is widely used for ventilation in industrial and mining enterprises, large-scale buildings, hotels, and restaurants.
The HFJZ-B craftsman kitchen fan is a square-housed ultra-quiet multi-blade centrifugal fan specially designed for kitchen exhaust. It was engineered to meet the demand for low-noise kitchen fans in modern kitchens and the exhaust requirements of communal ductwork. Compared to conventional multi-blade fans, it offers advantages such as higher pressure and lower noise levels. Moreover, it features a high static pressure design to tackle long ductwork and high resistance typical of modern kitchen setups.
The YWF Series External Rotor Fan is a new product developed by our company through repeated research and trial production. Compared with conventional axial flow fans, this fan features higher efficiency, lower noise, minimal vibration, compact structure, and aesthetically pleasing appearance. The impeller is directly mounted on the outer circumference of the external rotor, resulting in shorter axial dimensions. Its successful development represents a major breakthrough in the field of axial flow fans. This series has obtained multiple national patents.
The YWF Series External Rotor Fan is a new product developed by our company through repeated research and trial production. Compared with conventional axial flow fans, this fan features higher efficiency, lower noise, minimal vibration, compact structure, and aesthetically pleasing appearance. The impeller is directly mounted on the outer circumference of the external rotor, resulting in shorter axial dimensions. Its successful development represents a major breakthrough in the field of axial flow fans. This series has obtained multiple national patents.
The HX63 is a new type developed from the 11-62 series. Engineered to meet the demands of green industry and environmental noise reduction. Featuring a redesigned impeller with an optimized aerodynamic blade structure. This delivers key advantages: low noise, minimal vibration, and extended service life. Suitable for kitchen exhaust, fume extraction, or ventilation in public venues like canteens, hotels, and restaurants. Also ideal for use with production equipment such as grain machinery, chemical machinery, and plastic machinery. Highly versatile and adaptable for wide-ranging applications.
The YWL series external rotor multi-wing centrifugal fan is a new-type centrifugal fan developed by our company by incorporating advanced technologies at home and abroad. All fans are produced via modular manufacturing, subjected to static and dynamic balance correction, and treated with high-grade electrostatic spraying on the surface. They feature small size, large air volume, high efficiency, minimal vibration, low noise, and easy installation and debugging. The gases transported by this series of fans shall not contain viscous substances, and must be non-corrosive, non-flammable, and non-explosive.
The CBF Explosion-Proof Axial Fan is specialized ventilation equipment for hazardous environments. The fan is composed of an explosion-proof motor, blades, casing, etc. To prevent sparks from friction, the blades are made of cast aluminum alloy.The fan features low noise, low energy consumption, and superior performance. In addition to ventilation and exhaust, it can be installed in spaced series along long exhaust ducts to increase duct pressure. Unlike general fans in structure and material, its applications are similar.
The DWT type roof fan features low noise, light weight, smooth operation, high efficiency, and excellent anti-corrosion performance. It is applicable to indoor ventilation and air exchange in mechanical factory buildings and warehouses of petroleum, chemical, textile, metallurgy and other industries.
The medium pressure fan adopts stamped and aluminum alloy die-casting shell and fan blades, which are lightweight, novel in style, beautiful in appearance, and easy to install.The blades of the fan are designed to have the advantages of large air volume, high pressure, low vibration and low noise.
The 9-26 Type High-pressure Centrifugal Ventilator can be widely used for conveying materials, air, and gases that are non-corrosive, non-self-igniting, and free of viscous substances. The temperature of the conveyed medium generally does not exceed 80°C, and the dust and hard particles content does not exceed 150mg/m³. It is suitable for high-pressure ventilation in general forging and smelting, glass, ceramics, radio, electroplating, storage battery industries, as well as material conveying in processing industries such as grain, feed, mineral powder, and plastics.
The HTFC series multi wing low-noise cabinet centrifugal fan is a newly designed and developed product by our company to meet the needs of the increasingly developing commercial kitchen oil fume exhaust, industrial purification, and fresh air conditioning industries. Based on the digestion and absorption of advanced technologies at home and abroad, the principle of combining aerodynamics and aeroacoustics is applied. It has the characteristics of large air volume, high static pressure, low noise, and small vibration.
The casing of the plastic air mold fan is injection molded from engineering plastics, featuring light weight, low cost, good insulation and an attractive appearance. The blades of the fan are designed to have the advantages of large air volume, high pressure, low vibration and low noise.
The YWF Series External Rotor Fan is a new product developed by our company through repeated research and trial production. Compared with conventional axial flow fans, this fan features higher efficiency, lower noise, minimal vibration, compact structure, and aesthetically pleasing appearance. The impeller is directly mounted on the outer circumference of the external rotor, resulting in shorter axial dimensions. Its successful development represents a major breakthrough in the field of axial flow fans. This series has obtained multiple national patents.
